Southeast Asia Aftermarket Door Parts: Sourcing Guide by Country
Build your list from OEM numbers, position, year, drive side and voltage. Taiwan is not in RCEP or ASEAN agreements (Singapore's ASTEP is the exception), so the case is range and number matching, not duty. Country-by-country fleets, part numbers and broker checks.
The short answer
To source aftermarket door hardware for Southeast Asia from Taiwan, start with the vehicles your customers really repair, not with a country trade report. Build your list from OEM numbers. Add door position, year, drive side, motor and voltage, and finish. Check each HS line with your customs broker before you order. Take samples first, then combine many low-volume items in one container.
Be realistic about tariffs. Taiwan is not a party to RCEP, and it is not an ASEAN member. Except for Singapore, do not plan your price on a free trade preference for Taiwan-origin goods. The reason to buy from Taiwan is range and number matching, not duty.
Who this guide is for
This guide is for parts wholesalers, importers and parts counters in Southeast Asia. Most of you already have a broken part or an OEM number in your hand. Each country section below gives the same four things: the vehicle types that matter, the door-hardware families they need, example part numbers, and points to check with your broker.
The part numbers are examples from the HAO-GUO catalogue, not a full list. The catalogue has about 2,000 items. The largest groups by make are Toyota (about 470), Mitsubishi (about 275), Nissan (about 220), Honda (about 185), Mazda (about 130) and Isuzu (about 125). A catalogue listing does not prove fitment for your exact vehicle. Always confirm by OEM number.
Import rules change. The checks below are what we could verify in November 2026. They are not legal advice and they are not complete. Your licensed customs broker has the final word.
Taiwan's trade position: check this before you calculate price
RCEP is a free trade agreement between the ten ASEAN member states plus Australia, China, Japan, New Zealand and the Republic of Korea. Taiwan is not a party. Taiwan is also not part of the ASEAN free trade area or the ASEAN agreements with those partners.
Taiwan is a WTO member, under the name Chinese Taipei, since 1 January 2002. In practice, a Taiwan-origin door handle usually enters an ASEAN market at that country's normal, non-preferential duty rate. We do not quote rates here. They change, and they depend on the exact HS code. Ask your broker for the current rate on each line.
This also means your competition may pay less duty. A part made in Thailand, China, Japan or Korea may qualify for a preferential rate if it meets the agreement's rule of origin. Compare the landed cost line by line. Do not assume that Taiwan wins on price. Also, shipping through a third country does not by itself change the origin of the goods. Discuss any such plan with your broker first.
The Singapore exception: ASTEP
Taiwan does have one agreement in this region. ASTEP, the economic partnership agreement between Singapore and Taiwan, entered into force on 19 April 2014. Enterprise Singapore says it provides for the immediate elimination of tariffs on all goods originating from Taiwan.
Do not overvalue this. Singapore Customs lists only four groups of dutiable goods: intoxicating liquors, tobacco products, motor vehicles and petroleum products. So ASTEP rarely changes the price of a door handle. GST on import can still apply. ASTEP also gives no benefit when goods move on from Singapore to another ASEAN country.
Why buyers still source from Taiwan
If duty is not the reason, what is? For this category, the honest answer is breadth and number matching. A door-hardware line is a long tail. One wholesaler may need a handle for a current pickup, a window regulator for a 1990s truck and a hinge for an old van, all in the same order.
A wide catalogue organised by OEM number lets you combine these items with one supplier, so you do not need a separate source for each small line. The US Commercial Service guide on Cambodia also notes that parts from Thailand, Taiwan and other Asian sources cost less than US parts. That is a useful data point, but it is not a promise about your own landed cost.
Thailand: pickups come first
Thailand is a pickup country. Federation of Thai Industries figures reported in 2026 show that one-ton pickups make up most of Thai vehicle output, and most of those pickups are exported. In the home market, the Toyota Hilux and the Isuzu D-Max have long been the two main models. They trade first place by year.
This points to these door-hardware families: outside and inside handles, tailgate handles, door locks and actuators, window regulators, hinges and door checks. Work pickups open their doors many times a day and they carry dust. Handles and regulators are the natural first lines.
Thailand drives on the left, so Thai vehicles are right-hand drive. This matters for some numbers, as the next section shows.
Thailand part numbers: 69210-0K200, 69801-0K140, 8-97235975-1
Hilux outside handle: lever OEM 69210-0K200, cover OEM 69227-0K200 (catalogue note RL/RR); front right lever OEM 69210-0K060 (RHD) → HAO-GUO HG-TY-1095 (Toyota Hilux, 2015).
Hilux front window regulator without motor: FL OEM 69802-0K140, FR OEM 69801-0K140; rear left OEM 69804-0K110 → HAO-GUO HG-TY-6065P (Toyota Hilux, 2015).
D-Max outside handle, texture finish with key hole: FL OEM 8-97235975-1, FR OEM 8-97235959-1 → HAO-GUO HG-IS-1012 (Isuzu TFR 2002, catalogue note D-MAX).
D-Max front window regulator without motor: FL OEM 8-98009811-2, FR OEM 8-98009810-2 → HAO-GUO HG-IS-6026P (Isuzu TFR 2002, catalogue note D-MAX).
The catalogue lists years, not Thai sales names. If you know the vehicle as Revo or by another local name, confirm it by OEM number or VIN. Our guide "Toyota Hilux Door Parts by OEM Number: 69210-0K200, 69801-0K140" goes deeper on this model.
Thailand: what to check with your broker
TISI is the Thai standards body under the Ministry of Industry. The US Commercial Service reports that Thailand mandates certification for about 129 products across 18 sectors. Ask your broker whether your HS line falls under a compulsory TIS standard. We did not find door handles or regulators named in the sources we checked, but that is not proof that they are exempt. Get a clear answer for each line, because this can stop a shipment at customs.
Vietnam: light trucks and vans
Vietnam's working fleet leans towards light commercial vehicles. Trade reports name Thaco and Hyundai as the main forces in this segment, including the Hyundai Porter H150, which has been assembled in Vietnam since 2016. Isuzu also sells trucks there. Toyota sedans such as the Vios are widely sold too. Be careful with sales tables: reports note that VAMA's figures do not include some large brands, including Hyundai.
Light trucks need cab door handles, inside handles, window regulators, hinges and door checks. Delivery work means many door cycles every day. Vietnam drives on the right, so vehicles are left-hand drive. Do not assume that a number listed as RHD is correct for a Vietnamese vehicle.
Vietnam part numbers: 82650-4F000, 69210-06900, 8-97868112-1
Porter outside handle: LH OEM 82650-4F000 CA, RH OEM 82660-4F000 CA → HAO-GUO HG-HY-1009 (Hyundai Porter, 2006).
Porter inside handle: LH OEM 82610-4F000 RS, RH OEM 82620-4F000 → HAO-GUO HG-HY-2009 (Hyundai Porter, 2006).
Vios outside handle, chrome without key hole: OEM 69210-06900 → HAO-GUO HG-TY-1045 (Toyota Vios).
Elf window regulator with 24 V motor: L OEM 8-97868112-1, R OEM 8-97868111-1 → HAO-GUO HG-IS-6015P (Isuzu NPR, 1994, catalogue note ELF).
The catalogue lists the Porter as a 2006 item. It does not say this part fits the H150. If your truck is an H150, compare the number on your old part first.
Vietnam: what to check with your broker
First, labels. Decree 111/2021, which amended Decree 43/2017 and took effect on 15 February 2022, requires the original label on imported goods to show set information, including the product name and origin. Ask your broker what must be on the carton before you approve packaging.
Second, vehicle-part rules. Reports on Decree 116/2017 and related rules name parts such as tyres, mirrors, lamps, glass and fuel tanks. Door hardware was not in the reports we read, but the rules have changed since then. Ask whether any certificate or inspection applies to your HS line today.
Philippines: vans, pickups and the L300
In 2025 sales data reported by the Manila Bulletin, both the Toyota Hilux and the Toyota HiAce were in the top five models. The Mitsubishi L300 is a separate working-vehicle story. Mitsubishi Motors Philippines reached its 900,000th locally built L300 in early 2026, in forms such as FB body and dropside.
These vehicles work as passenger vans and small cargo carriers. For door hardware, this means sliding-door and middle-door handles, tailgate handles, inside handles, window regulators and hinges. Passenger service wears inside handles and sliding-door parts quickly. The Philippines drives on the right, so check drive side on every number you take from an RHD market list.
Philippines part numbers: MB421497, 69023-26040, 69208-26010
L300 outside handle: L OEM MB421497, R OEM MB421498 → HAO-GUO HG-MB-1004 (Mitsubishi L300, catalogue note L300 90' and L200 96').
L300 window regulator with 12 V motor: L OEM MB421445 / CW603575, R OEM MB421446 / CW603576 → HAO-GUO HG-MB-6006P (Mitsubishi L300, 1990).
H200 tailgate handle: OEM 69023-26040 → HAO-GUO HG-TY-3026 (Toyota H200, 2005).
H200 middle-door inside handle in gray, black or beige: L OEM 69208-26010, R OEM 69207-26010 → HAO-GUO HG-TY-2053 (Toyota H200, 2005).
For more detail, see "Toyota Hiace H200 Door Parts by OEM Number: 76811-26130 and More" and "Mitsubishi L300 and L200/Strada Door Parts: OEM Number Guide".
Philippines: what to check with your broker
The Bureau of Philippine Standards (DTI-BPS) runs the mandatory PS mark and ICC schemes. Its automotive-related list shows items such as seat belts, safety glass, lead-acid batteries, tyres, inner tubes and speed limiters. Door hardware is not on the automotive list we read. Ask your broker to confirm this against the current list for your exact HS line. The list changes, and a listed product cannot be sold without the mark or sticker.
Malaysia: national cars, Hilux and the Elf
Malaysia's car market is led by Perodua and then Proton, according to 2025 sales reports. In working vehicles, the Toyota Hilux leads the pickup segment, with the Isuzu D-Max in second place. The Isuzu Elf was reported as Malaysia's best-selling truck in 2025.
Be honest about the fit here. The catalogue does not list Perodua by name, so this is not the place to look for high-volume Perodua lines. Some items are listed under Mitsubishi with a note such as WIRA or SAGA. Check these by OEM number; do not assume they fit a Proton. The stronger match is pickups and light trucks: cab handles, regulators, locks and hinges. Malaysia is right-hand drive.
Malaysia part numbers: 8-97852108-5, 8-98029237-2, MB794018
Elf outside handle: L OEM 8-97852108-5 / 8-97867722-0, R OEM 8-97852107-4 / 8-97867721-0 → HAO-GUO HG-IS-1002 (Isuzu NPR, 1994, catalogue note NKR 94' ELF).
Truck window regulator with 24 V motor: L OEM 8-98029237-2, R OEM 8-98050288-1 → HAO-GUO HG-IS-6030P (Isuzu NPR, 2007, catalogue note NQR, NWR, NLR 07').
Inside handle in gray, brown or black: L OEM MB794018, R OEM MB794020 → HAO-GUO HG-MB-2017 (Mitsubishi Lancer, 1994, catalogue note WIRA).
Hood lock, RHD: OEM MB847334 → HAO-GUO HG-MB-4039 (Mitsubishi, catalogue note WIRA).
For the trucks, see "Canter, ELF, Hino Cab Door Parts: MK403139, MK485160, S5575-E0010".
Malaysia: what to check with your broker
A WTO import-licensing notice for Malaysia names used brake parts and reusable vehicle batteries as licensed items, with MITI as the licensing body. Vehicles themselves need an Approved Permit, which is a different matter from parts. New door hardware is not named in the notice we read. Ask your broker to confirm the position for your HS line, and to confirm that nothing in your order is treated as used goods.
Singapore: a small fleet with many goods vehicles
Singapore is small, but its working fleet is well documented. The Land Transport Authority table for 2024 shows 92,661 light goods vehicles and 31,492 heavy goods vehicles. LTA also publishes goods vehicles by make, so you can check your own target makes rather than rely on a general claim.
The door-hardware need is the usual one for vans and light trucks: cab and sliding-door handles, tailgate handles, regulators, hinges. Singapore is right-hand drive. If you re-export, remember that each destination has its own rules.
Singapore part numbers: MK488225, 68440-1060, S5575-E0010
Canter window regulator with 12 V motor: L OEM MK488225, R OEM MK488226 → HAO-GUO HG-MB-6036P (Mitsubishi Canter, 2003).
Canter window regulator with 24 V motor: L OEM MK488223, R OEM MK488224 → HAO-GUO HG-MB-6037P (Mitsubishi Canter, 2003).
Hino window regulator with 24 V motor: L OEM 68440-1060, R OEM 68430-1150 → HAO-GUO HG-HN-6009P (Hino Ranger 15T, 2003).
Hino panel handle: OEM S5575-E0010; covers L OEM S7645-41012, R OEM S7645-31012 → HAO-GUO HG-HN-3502 (Hino Ranger 15T, 2003).
Compare the first two lines. Same truck name, same year, different voltage, and a different number. This is why the voltage field in your inquiry matters.
Singapore: what to check with your broker
Singapore Customs requires a Customs Import Permit through TradeNet. You need a Unique Entity Number and an activated customs account, or a Declaring Agent can apply for you. GST and duties are paid where applicable. Ask your agent to confirm the correct code and whether any competent authority applies to your line. We found no parts-specific LTA rule, but we did not find a statement that excludes one either.
Myanmar: used Japanese vehicles and two drive sides
Reports over many years describe Myanmar's fleet as mostly used Japanese vehicles. Yangon street reports from 2014 pointed to the Toyota Probox as a taxi and to the Town Ace and Lite Ace as common small vans. Toyota later planned local Hilux assembly. These reports are old, so check today's demand with your own customers.
The fleet also has a drive-side problem. Myanmar drives on the right, yet reports say right-hand-drive cars remain common on its streets, even though import policy has moved to left-hand drive. So a shop in Myanmar may need both versions.
Myanmar part numbers: 69220-BZ260, 69240-BZ011, 8-94271303-2
Town Ace outside handle: L OEM 69220-BZ260, R OEM 69210-BZ260 → HAO-GUO HG-TY-1105 (Toyota Town Ace).
Town Ace middle-door outside handle: L OEM 69240-BZ011, R OEM 69230-BZ011 → HAO-GUO HG-TY-1102 (Toyota Town Ace).
Older light truck outside handle: L OEM 8-94271303-2, R OEM 8-94271302-2 → HAO-GUO HG-IS-1001 (Isuzu NPR, 1984, catalogue note NKR 84').
Town Ace bodies vary across generations. The catalogue does not give a year for these two items, so compare your old part with the number before you order.
Myanmar: what to check with your broker
Licensing comes first. Myanmar's import-licence list has grown in steps since 2022 and covers thousands of tariff lines. Check the current list on the Myanmar Trade Portal. Law firm Tilleke & Gibbins reports that Notification 115/2026 of 6 July 2026 says goods must not be imported before a licence is issued or after it expires. It also sets penalties for imports without a licence. Do not ship until your licence is in hand.
Payment comes second. In June 2023 the US Treasury designated two Myanmar state banks, Myanma Foreign Trade Bank and Myanma Investment and Commercial Bank. Ask your bank early which payment route it will accept, and screen every party against current sanctions lists.
Cambodia: left-hand drive, used imports, Toyota
The US Commercial Service guide on Cambodia, published in November 2025, says most cars are imported second-hand, and that the United States is the largest supplier of used vehicles. Popular types are four-wheel-drive vehicles, SUVs, pickups and mid-sized sedans. Toyota is a top brand because parts are easy to find and affordable. The guide also says all car imports must be left-hand drive.
This gives you a different parts list from Thailand next door. If your customers run US-origin Toyota vehicles, your numbers may differ from those for Asian-market models. Ask for the number on the old part. Outside handles, hood locks and window regulators are the natural first lines.
Cambodia part numbers: 69220-35020, 69220-48030, 53510-06080
Pickup outside handle: L OEM 69220-35020, R OEM 69210-35020 → HAO-GUO HG-TY-1040 (Toyota Tacoma, catalogue note PICK UP 95').
RX300 outside handle, black: FL OEM 69220-48030, FR OEM 69210-48030 (with key hole); rear RL OEM 69240-48010, RR OEM 69230-48010 → HAO-GUO HG-TY-1064A (Toyota RX300, 1999).
Camry hood lock, LHD: OEM 53510-06080 → HAO-GUO HG-TY-4066 (Toyota Camry, 2004).
Cambodia: what to check with your broker
We did not find an official rule specific to new door hardware. So ask your broker three things: the HS code and the rate for it, the documents customs wants for this line, and whether a Ministry of Commerce requirement applies. Do not rely on online summaries of vehicle duties, because they deal with whole vehicles.
Indonesia: read our separate guides
Indonesia has its own detailed articles, so we do not repeat them here. Read "Indonesia's Auto Aftermarket: Vehicle Park, Distribution Layers and Quality Tiers", "Importing Aftermarket Auto Parts into Indonesia: NIB/API, the 2025 Import Rules, Mandatory SNI and Customs", and "Taiwan to Indonesia Auto Parts Imports: Shipping, Duty, PPN, PPh 22 and Payment Terms in One Landed-Cost Template".
How to prepare an RFQ: start with the OEM list
A good request for quotation is a list, not a sentence. Do not write "Hilux door handles". Write one line for each part: OEM number, make, model, year, position, quantity. Copy every number exactly. In numbers such as 69210-0K200, a zero and the letter O are easy to confuse, so send a photo of the label if you can.
If you do not have the number, send the old part's photos and the VIN. Our article "How to Find the Right Part Fast from an OEM Number: The Search and Quote Workflow" explains the search steps. Some items have more than one number, like the Elf handle above, so list every number you know.
RFQ field: position and drive side
State the position on each line: front left, front right, rear left, rear right, middle door or tailgate. Catalogues often shorten these to FL, FR, RL, RR, L and R. Say which side you mean as seen from the driver's seat, facing forward.
Then state the drive side. The Hilux lever 69210-0K060 is marked RHD in the catalogue. The Camry hood lock 53510-06080 is marked LHD. The City regulator HG-HD-6016P (FL OEM 72251-SX8-003, FR OEM 72211-SX8-003, without motor) is marked RHD. Thailand, Malaysia, Singapore and Indonesia are right-hand drive. Vietnam, the Philippines and Cambodia are left-hand drive, and Myanmar has both on its roads.
RFQ field: year and chassis
A model name is not a generation. The catalogue may show "Hilux 2015" or "H200 2005", while your market uses another sales name for the same vehicle, or the same name for another vehicle. Give the year and the chassis or VIN code if you have it. If your vehicle's year is near a model change, send a photo before you confirm.
RFQ field: motor and voltage
For a window regulator, always state with motor or without motor, and 12 V or 24 V. Compare HG-TY-6065P, which is without motor, with HG-MB-6036P and HG-MB-6037P, which are 12 V and 24 V versions for the same Canter year. Light trucks in this region can be either voltage. Check the vehicle's battery system, not only the model name. A wrong voltage is a costly return, because the part looks correct until it is installed.
RFQ field: colour, finish and key hole
Handles come in versions. HG-IS-1012 has texture and smooth finishes, with key hole and without. HG-TY-2053 has gray, black and beige. The H200 licence frame is another example: HG-TY-3028 (OEM 76811-26130) is black without a camera hole, HG-TY-3029 (OEM 76811-26140) is chrome without a camera hole, and HG-TY-3030 (OEM 76811-26160) is black with a camera hole. State each of these on the line. If you are not sure, a photo of the old part answers it.
RFQ field: packaging and photos
Say what your market needs on the carton before the supplier quotes. Ask for the OEM number, position and country of origin on each inner box, and check any local label rule with your broker. If you sell under your own brand, say so at the start, and see our article "Private Label and Packaging Strategy: How an Aftermarket Parts Trader Moves From Neutral Boxes to an Owned Brand".
Add photos of the old part from the front, the back and any printed number. One clear photo often prevents one wrong shipment.
Sample first
Before a large order, buy samples of the lines that carry the most risk. Fit them on a real vehicle in your market. Check the fit to the door, the feel of the handle, the lock function and the movement of the glass. Check the finish after some weeks outside.
Use samples to test your paperwork too. Show the sample's carton and label to your broker. It is much cheaper to change a label now than after a full container reaches the port.
Mixed-container logic
Door hardware suits mixed containers. No single item may justify a full container, but many items together can. Our article "The Economics of Mixed Containers: How Small-Lot, Wide-Range Buying Cuts Long-Tail Inventory Risk" covers the reasoning.
A simple method: start from your fast lines, such as handles and regulators for your main pickup or truck. Add the slow lines you often lose sales on. Keep each part in its own labelled carton. Group the lines by HS code for your broker, because a single line that needs a licence or certificate can delay the whole container. Clear those lines before loading, not after.
Climate question 1: heat and sun
Heat and strong sun work on plastic parts first. Handles and covers can fade, become brittle and crack, and door checks and rubber parts can age faster. Questions to ask your supplier: what material is used for the lever and the cover? Is it UV-stabilised? How is the chrome or paint applied to plastic, and how is adhesion tested? Ask for test evidence, not an adjective.
Climate question 2: humidity and salt
Humidity and coastal salt work on metal and plating. Look at hinge pins, strikers, latch springs, regulator tracks and cables. Questions to ask: what is the base metal? What is the plating or coating? Which salt-spray test is used, for how many hours, and what result counts as a pass?
Material can also change the part number choice in the catalogue. The Canter window handle with OEM MK485160 comes as HG-MB-3016 (without zinc) and HG-MB-3017 (with zinc). Ask which version suits your customer's use, and do not mix the two in one stock line.
Climate question 3: floods and door-cavity water
In flood-prone areas, water reaches the inside of the door. The usual later failures are window motors, regulator cables, lock actuators and connectors. They often appear weeks after the water has gone. Questions to ask: are the motor and the connector sealed? Are the cable and track protected against corrosion? What should a workshop clean or check before fitting? Our article "Flood-Damaged Vehicles and Tropical Humidity: Door, Window and Lock Parts Failure, Repair and Stocking (Indonesia)" covers repair steps.
What to stock first
For wholesalers, start with the parts that fail by use and that block a working vehicle from earning. These are usually outside handles, inside handles, window regulators (with the right voltage), door locks and actuators. Then add hinges, door checks, tailgate handles and sliding-door parts for vans.
Build the list from your own sales records and lost-sale notes, and match it to the fleet in your country. Expect pickup lines to matter in Thailand and Malaysia, and vans and L300 lines in the Philippines. Light-truck lines are important across the region. Do not stock from a regional average. Check the catalogue for the makes your customers really bring in.
Next step
Send your OEM list with position, year, drive side, voltage, finish and photos through the HAO-GUO contact page. We will check each number against the catalogue and tell you clearly which ones we can and cannot match.
FAQ
- Do Taiwan-made door parts get RCEP or ASEAN preferential duty?
- Do not plan on it. RCEP's parties are the ten ASEAN members plus Australia, China, Japan, New Zealand and Korea. Taiwan is not a party and not an ASEAN member. Taiwan is a WTO member, so goods usually pay the importing country's normal, non-preferential rate. Confirm the rate for your HS code with your broker.
- Does ASTEP help with door parts imported into Singapore?
- Only a little. ASTEP has been in force since 19 April 2014 and removes tariffs on Taiwan-origin goods. But Singapore Customs lists only liquor, tobacco, motor vehicles and petroleum as dutiable, so it rarely changes the price of a door handle. GST can still apply, and goods moving on to other ASEAN countries get no benefit.
- What should a door-parts RFQ include?
- One line per part: OEM number, make, model, year, position, drive side, quantity. For regulators add with or without motor and 12 V or 24 V. For handles add colour, finish and key hole. Then add packaging needs and photos of the old part.
- Do door handles need compulsory certification such as TISI or ICC?
- The sources we checked do not name door hardware. For example, the Philippine DTI-BPS automotive list shows tyres, safety glass, batteries and similar items. That is not proof of exemption, and lists change. Ask your broker to confirm for your exact HS line before you order.
- Can the same part number be used in RHD and LHD markets?
- Do not assume so. The catalogue marks the Hilux lever 69210-0K060 as RHD and the Camry hood lock 53510-06080 as LHD. Thailand, Malaysia, Singapore and Indonesia are RHD; Vietnam, the Philippines and Cambodia are LHD; Myanmar has both on its roads. State the drive side in your RFQ and compare the old part's number.
- Which door parts should a Southeast Asian wholesaler stock first?
- Start with parts that fail by use and stop a working vehicle from earning: outside handles, inside handles, regulators in the right voltage, door locks and actuators. Then add hinges, door checks, tailgate handles and sliding-door parts. Build the list from your own sales and lost-sale records, not a regional average.
Sources
- RCEP Support Unit — Regional Comprehensive Economic Partnership, parties to the agreement
- Enterprise Singapore — Agreement between Singapore and the Separate Customs Territory of Taiwan, Penghu, Kinmen and Matsu on Economic Partnership (ASTEP)
- US International Trade Administration — Thailand Country Commercial Guide: Standards for Trade (TISI)
- DTI Bureau of Philippine Standards — List of Products Under Mandatory Certification
- WTO Import Licensing — Malaysia: vehicle parts, batik and chemicals
- Tilleke & Gibbins — Myanmar Issues New Import and Export Compliance Procedures (July 2026)
- US International Trade Administration — Cambodia Country Commercial Guide: Passenger Cars, Truck and Automotive Parts
Related guides
- UK Aftermarket Door Hardware: MOT Rules, an Ageing Parc and How to Source
- Australia's Ute Fleet, Right to Repair and Parts Sourcing: A Distributor's Guide to Importing Door Hardware from Taiwan
- Sourcing Taiwan Automotive Exterior Parts: The Importer’s Full Checklist
- The Sourcing Logic of Cross-Brand Commonality: Cut SKUs with Platform Sharing, Not with Guesswork